4.1.8 FC 51 Type 1 Kit Mounting Instruction
for M1, M2 and M3
Step 1
Mount metal plate on frequency converter and tighten the
screws. Tightening torque: 2 Nm.
M1
4 x ½”
M2
5 x ½ “
M3
2 x ½”
3 x 3/4”
Table 4.5 Conduit Sizes
Illustration 4.10 Mount Metal Plate on Frequency Converter
Step 2
Fit bottom cover on frequency converter and tighten
screw.
Illustration 4.11 Fit Bottom Cover on Frequency Converter
4.1.9 FC 51 Type 1 Kit Mounting Instruction
for M4 and M5
Step 1
Mount metal plate on frequency converter and tighten the
screws. Tightening torque: 2 Nm.
M4
3x½”
M5
3x1“
Table 4.6 Conduit Sizes
Illustration 4.12 Mount Metal Plate on Frequency Converter
Step 2
Fit bottom cover on frequency converter and tighten
screw.
Illustration 4.13 Fit Bottom Cover on Frequency Converter
Selection
VLT
®
Micro Drive FC 51 Design Guide
30
MG02K302 - Rev. 2013-12-03
4
4