Modbus TCP
Modbus TCP is the first industrial Ethernet-
based protocol for automation. Modbus TCP is
able to handle connection intervals down to 5
ms in both directions, positioning it among the
fastest performing Modbus TCP devices in the
market. For master redundancy, it features hot
swapping between two masters.
Other features:
Dual Master PLC connection for redundancy
in dual port options (MCA 122 only)
VLT® Modbus TCP MCA 122
Order code
130B1196 standard, dual-port
130B1296 coated, dual-port
POWERLINK
POWERLINK represents the second generation
of fieldbus. The high bit rate of industrial
Ethernet can now be used to make the full
power of IT technologies used in the
automation world available for the factory
world.
POWERLINK provides high performance
real-time and time synchronization features.
Due to its CANopen-based communication
models, network management and device
description model, it offers much more than
just a fast communication network.
The perfect solution for:
Dynamic motion control applications
Material handling
VLT® EtherCAT MCA 124
Order code
130B5546 standard
130B5646 coated
VLT® DeviceNet Converter
The VLT® DeviceNet Converter MCA 194
emulates VLT® 5000 commands in the
VLT® AutomationDrive.
This means that a VLT® 5000 drive can be
replaced by the VLT® AutomationDrive, or a
system can be expanded without costly
change of the PLC program.
The option emulates I/O instances and explicit
messages of a VLT® 5000.
VLT® DeviceNet Converter MCA 194
Order code
130B5601 coated
Synchronization and positioning
applications
Built-in web server
E-mail client for service notification
VLT® POWERLINK MCA 123
Order
code
130B1489 standard, dual-port
130B1490 coated, dual-port
EtherCAT
The EtherCAT offers connectivity to
EtherCAT®-based networks via the EtherCAT
Protocol.
The option handles the EtherCAT line
communication in full speed, and connection
towards the drive with an interval down to 4
ms in both directions. This allows the option to
participate in networks ranging from low
performance up to servo applications.
EoE Ethernet over EtherCAT support
HTTP (Hypertext Transfer Protocol) for
diagnosis via built-in web server
CoE (CAN Over Ethernet) for access to drive
parameters
SMTP (Simple Mail Transfer Protocol)
for e-mail notification
TCP/IP for easy access to drive configuration
data from MCT 10
VLT® General Purpose I/O
MCB 101
This I/O option offers an extended number of
control inputs and outputs:
3 digital inputs 0-24 V: Logic ‘0’ < 5 V; Logic
‘1’ > 10V
2 analog inputs 0-10 V: Resolution 10 bit
plus sign
2 digital outputs NPN/PNP push pull
1 analog output 0/4-20 mA
Spring-loaded connection
Ordering number
130B1125 standard
130B1212 coated
(Class 3C3/IEC 60721-3-3)
VLT® Resolver Input MCB 103
This option enables connection of a resolver to
provide speed feedback from the motor.
Primary voltage ............................................ 2-8 Vrms
Primary frequency ...................................2.0-15 kHz
Primary current max ..............................50 mA rms
Secondary input voltage ............................4 Vrms
Spring-loaded connection
Ordering number
130B1127 standard
130B1227 coated
(Class 3C3/IEC 60721-3-3)
VLT® Encoder Input MCB 102
This option offers the possibility to connect
various types of incremental and absolute
encoders. The connected encoder can be used
for closed loop speed/position control as well
as closed loop flux motor control.
The following encoder types are supported:
5V TTL (RS 422)
1VPP SinCos
SSI
Hiperface
EnDat 2.1 and 2.2
Ordering number
130B1115 standard
130B1203 coated
(Class 3C3/IEC 60721-3-3)
B options: Functional extensions
Available for the full product range
Functional extensions
Typecode position
B
VLT® General Purpose MCB 101
15
VLT® Encoder Input MCB 102
VLT® Resolver Input MCB 103
VLT® Relay Option MCB 105
VLT® Safety PLC I/O MCB 108
VLT® Analog I/O Option MCB 109
VLT® PTC Thermistor Card MCB 112
VLT® Sensor Input Card MCB 114
VLT® Safety Option MCB 150 TTL
VLT® Safety Option MCB 151 HTL
VLT® Safety Option MCB 152 PROFIsafe STO
47
| Content | Danfoss Drives · DKDD.PB.302.A8.02