6.8 15-** Drive Information
6.8.1 15-0* Operating Data
15-00 Operating hours
Range:
Function:
0 h
*
[0 - 2147483647 h] View how many hours the unit has
run. The value is saved when the unit
is turned off.
15-01 Running Hours
Range:
Function:
0 h
*
[0 - 2147483647
h]
View how many hours the filter has
run. Reset the counter in
15-07 Reset
Running Hours Counter
. The value is
saved when the unit is turned off.
15-03 Power Up's
Range:
Function:
0
*
[0 - 2147483647 ] View the number of times the unit has
been powered up.
15-04 Over Temp's
Range:
Function:
0
*
[0 - 65535 ] View the number of unit temperature faults
that have occurred.
15-05 Over Volt's
Range:
Function:
0
*
[0 - 65535 ] View the number of unit overvoltages that
have occurred.
15-07 Reset Running Hours Counter
Option:
Function:
[0]
*
Do not
reset
[1]
Reset
counter
Select
[1] Reset
and press [OK] to reset the
running hours counter to zero (see
parameter 15-01 Running Hours
). This
parameter cannot be selected via the serial
port, RS485.
Select
[0] Do not reset
if no reset of the
running hours counter is desired.
6.8.2 15-1* Data Log Settings
The data log enables continuous logging of up to 4 data
sources (
15-10 Logging Source
) at individual rates
(
parameter 15-11 Logging Interval
). A trigger event
(
15-12 Trigger Event
) and window (
15-14 Samples Before
Trigger
) are used to start and stop the logging
conditionally.
15-10 Logging Source
Array [4]
Option:
Function:
Select which variables are to be
logged.
[0]
*
None
[1600] Control Word
[1603] Status Word
[1630] DC Link Voltage
[1634] Heatsink Temp.
[1635] Inverter Thermal
[1660] Digital Input
[1666] Digital Output [bin]
[1690] Alarm Word
[1692] Warning Word
[1694] Ext. Status Word
15-11 Logging Interval
Array [4]
Range:
Function:
Size related
*
[ 0.000 - 0.000 ] Enter the interval in ms between
each sampling of the variables to
be logged.
15-12 Trigger Event
Select the trigger event. When the trigger event occurs, a
window is applied to freeze the log. The log then retains a
specified percentage of samples before the occurrence of the
trigger event (
parameter 15-14 Samples Before Trigger
).
Option:
Function:
[0]
*
False
[1]
True
[2]
Running
[6]
Current limit
[16]
Thermal warning
[19]
Warning
[20]
Alarm (trip)
[21]
Alarm (trip lock)
[33]
Digital input DI18
[34]
Digital input DI19
[35]
Digital input DI27
[36]
Digital input DI29
15-13 Logging Mode
Option:
Function:
[0]
*
Log always
Select
[0] Log always
for continuous
logging.
[1]
Log once on
trigger
Select
[1] Log once on trigger
to
conditionally start and stop logging using
15-12 Trigger Event
and
15-14 Samples Before
Trigger
.
Applications and Basic Prog...
Operating Instructions
52
Danfoss A/S © 09/2014 All rights reserved.
MG90V302
6
6