13
Danfoss Heating Solutions
VIIDH102
11/2013
User Guide
living connect®
3.
?
Room Devices
Bedroom, North
The room contains:
Add a device
Remove a device
^
^
0 x
The configuration is invalid:
Room has no devices at all.
4.
?
Add Room Devices
Keep the device within 1 meter
of the controller and get ready
to begin installation. Press here
when ready:
Begin registrationn
1
2
Press the installation-button on
the device now.
Select “Add a device”.
Press “Begin Registration”, and then press and
release on the thermostat.
5.
Yes
Device was added:
FTS-117
Add another?
No
6.
?
Heating System Mode
Decide what the heating system
prioritizes.
Heating with low return
temperature (recommended for
district heating).
Fast heating with warm radiators
(recommended for boilers).
Moderate response
Quick response
Choose “Yes” to add another device to the
room, choose “No” to continue.
Choose Heating System and press .
7.
?
Radiator Configuration
Here you can configure how the
radiators are placed:
Used when radiators are visible.
Used when radiators are
covered.
Visible Radiators
Covered Radiators
8.
Once a device has been registered and the
Danfoss Link™ CC is placed in final posi-
tion, you must perform a network test -
see installation guide for Danfoss Link™ CC
Choose Radiator Type and press (only with
Danfoss Link™ RS room sensor).
