Danfoss FT1312 Hose Proof Test Stand Operators Manual
2 | Danfoss FT1312 Hose Proof Test Stand Operators Manual | 2023.06.
AQ452153740268en-010101
Safety Instructions
!
WARNING
Danfoss fitting tolerances are engineered to match Danfoss hose
tolerances. The use of Danfoss fittings on hose supplied by other
manufacturers and/or the use of Danfoss hose with fittings supplied
by other manufacturers may result in the production of unreliable and
unsafe hose assemblies and is neither recommended nor authorized by
Danfoss:
Failure to follow Danfoss process and product instructions and
limitations could lead to premature hose assembly failures resulting in
property damage, serious injury or death.
The user must exercise extreme care when operating any Danfoss
assembly equipment with powered moving components. Safety
glasses must be worn at all times when using any Danfoss assembly
equipment.
Read and understand the owners and operators manual before
attempting to operate any equipment.
Danfoss hereby disclaims any obligation or liability (including incidental
and consequential damages) arising from breach of contract, warranty,
or tort (under negligence or strict liability, theories) should Danfoss
hose, fittings or assembly equipment be used with the hose, fittings or
assembly equipment supplied by another manufacturer or in the event
that product instructions for each specified hose assembly are not
followed.
!
CAUTION
A
ll hoses must be dried after testing! Tested hose assemblies can be
dried by blowing out with dry shop air. Any water remaining in the
tested hose assembly following proof test operation may cause rust on
the inside of fittings or may not be compatible with the system using
the hose assembly.
