Danfoss FT1312 Hose Proof Test Stand Operators Manual
12 | Danfoss FT1312 Hose Proof Test Stand Operators Manual | 2023.06.
AQ452153740268en-010101
FT1312 Hose Proof Test Stand
The FT1312 hose proof test stand is designed for easy and economical
hydrostatic testing of hydraulic hose assemblies.
Proof testing at twice the recommended working pressure is an easy
nondestructive way to test hose assembly reliability before it leaves
the shop.
Practical and self-contained, the FT1312 machine has an air driven pow-
er unit that can develop a maximum of 22,000 psi hydraulic pressure
using 100psi clean, dry shop air. The power unit (FT1312-2-5) can be
ordered separately.
Two types of tooling are available for proof testing with the FT1312
machine. Standard Danfoss adap ters may be used with any Danfoss
hose assembly. Special proof test adapters with O-Ring seals are
available for internal skive crimp hose assemblies. Proof test adapters
must be ordered separately
FEATURES
•
Designed to use tap water, eliminating the need for a special test
fluid.
•
Compact power unit is air driven.
•
Tests assemblies up to 2 inches inside diameter, 6-spiral wire.
•
Cabinet construction withstands hose assembly failures and func-
tions as a reservoir.
•
Air regulator and gauge provide easy pressure adjustment and
monitoring.
•
Tough transparent Lexan lid resists impact resulting from assembly
failure.
POWER UNIT
The power unit of the FT1312 tester is a compact, economical air driven
hydraulic pump. It will provide sufficient hydraulic pressure to proof test
any Danfoss hose assembly.
The pump operates on a simple principle of pressure magnification
through use of differential areas in which a relatively large air operated
piston drives a smaller piston to provide fluid flow at high pressures.
SPECIFICATIONS
Dimensions
79 inches wide × 36 inches deep × 53 inches high
Weight
550 pounds
Test Fluid
Tap water
Pump
Air driven hydraulic
Air Requirements
70-100psi clean, dry shop air
Pressure Capabilities
Variable: to 15,250 psi with 70 psi clean,
dry shop air, to 22,000 psi maximum
with 100 psi clean, dry shop air
Tooling
Standard adapters or special
O-Ring seaI proof test adapters
