FC 300 Operating Instructions
Safety Instructions and General Warning
Equipment containing electrical components may not be disposed
together with domestic waste.
It must be separate collected with Electrical and Electronic waste
according to local and currently valid legislation.
Caution
The FC 300 AutomationDrive DC link capacitors remain charged after power has been
disconnected. To avoid an electrical shock hazard, disconnect the FC 300 from the mains
before carrying out maintenance. Wait at least as follows before doing service on the
frequency converter:
FC 300:
0.25 – 7.5 kW
4 minutes
FC 300:
11 – 22 kW
15 minutes
Be aware that there may be high voltage on the DC link even when the LEDs are turned off.
7
MG.33.A7.02 - VLT is a registered Danfoss trademark
