FC 300 Operating Instructions
How to Read these Operating Instructions
"
How to Read these Operating Instructions
VLT
®
AutomationDrive FC 300 is designed to provide high shaft performance on electrical motors. Please
read this manual carefully for proper use. Incorrect handling of the frequency converter may cause improper
operation of the frequency converter or related equipment, shorten lifetime or cause other troubles.
These Operating Instructions will help you get started, install, program, and trou-
bleshoot your VLT
®
AutomationDrive FC 300.
The VLT
®
AutomationDrive FC 300 comes in two shaft performance levels. FC 301 ranges from scalar
(U/f) to VVC+, and FC 302 ranges from scalar (U/f) to servo performance.
These Operating Instructions cover both FC 301 and FC 302. Where information covers both series,
we refer to FC 300. Otherwise, we refer specifically to either FC 301 or FC 302.
Chapter 1,
How to Read these Operating
Instructions
, introduces the manual and
informs you about the approvals, symbols, and
abbreviations used in this literature.
Page divider for How to Read these Operating Instructions.
Chapter 2,
Safety Instructions and General
Warnings
, entails instructions on how to
handle the FC 300 correctly.
Page divider for Safety Instructions and General Warnings.
3
MG.33.A7.02 - VLT is a registered Danfoss trademark
