NB!
This parameter is active only when par. 8-01 Control
Site
is set to [0]
Digital and control word
.
8-51 Quick Stop Select
Option:
Function:
[0]
Digital input
[1]
Bus
[2]
Logic AND
[3] *
Logic OR
Select control of the Quick Stop function via the terminals (digital input) and/or via the bus.
NB!
This parameter is active only when par. 8-01 Control
Site
is set to [0]
Digital and
control word
.
8-52 DC Brake Select
Option:
Function:
Select control of the DC brake via the terminals (digital input) and/or via the fieldbus.
[0]
Digital input
[1]
Bus
[2]
Logic AND
[3] *
Logic OR
NB!
This parameter is active only when par. 8-01 Control
Site
is set to [0]
Digital and control word
.
8-53 Start Select
Option:
Function:
Select control of the frequency converter start function via the terminals (digital input) and/or via
the fieldbus.
[0]
Digital input
Activates Start command via a digital input.
[1]
Bus
Activates Start command via the serial communication port or fieldbus option.
[2]
Logic AND
Activates Start command via the fieldbus/serial communication port, AND additionally via one of the
digital inputs.
[3] *
Logic OR
Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.
NB!
This parameter is active only when par. 8-01 Control
Site
is set to [0]
Digital and control word
.
8-54 Reversing Select
Option:
Function:
[0]
Digital input
Select control of the frequency converter reverse function via the terminals (digital input) and/or
via the fieldbus.
[1]
Bus
Activates the Reverse command via the serial communication port or fieldbus option.
7. Parameters
FC 300 Interbus Operating Instructions
36
MG.33.H3.02 - VLT is a registered Danfoss trademark
7