5.2.2 Network variable description - FC VSD Profile - output
Status Word
Variable name:
SNVT type:
State:
nvoStatusWord
SNVT_state
Boolean 1 bit x 16
This variable is a 16-bit word providing status information on the frequency converter. For more information on the status word, please refer to the
Danfoss FC Control Profile
section.
NB!
Please note that in the representation of the Status Word in the LonMaker Browser, the Least Significant Bit (LSB) is to the far left.
Drive Output [%]
Variable
name:
SNVT
type:
Value:
nvoOutputPcnt
SNVT_lev_percent
Min.
Max.
Resolution:
-163.840 %
+163.840 %
0.005 %
In open loop operation, this variable contains the frequency converter output frequency in percentage, within the reference range.
In closed loop operation, this variable contains the frequency converter feedback signal, within the reference range.
Drive Output [Hz]
Variable
name:
SNVT
type:
Value:
nvoOutputHz
SNVT_freq_hz
Min.
Max.
Resolution:
0 Hz
6,500 Hz
1 Hz
This variable displays the actual output of the frequency converter motor frequency in Hz.
kWh Counter [kWh]
Variable
name:
SNVT
type:
Value:
nvoDrvEnrg
SNVT_elec_kwh_l
Min.
Max.
Resolution:
0 kWh
219,748,364.8 kWh
1 kWh
This variable contains the power consumption of the motor in kWh measured as a mean value over a one hour period.
VLT® FC 100 LonWorks
5 Configuration of the system
MG.11.E2.02 - VLT
®
is a registered Danfoss trademark
27
5
Summary of Contents for FC 100
Page 5: ...2 Safety VLT FC 100 LonWorks 4 MG 11 E2 02 VLT is a registered Danfoss trademark 2...
Page 11: ...4 How to install VLT FC 100 LonWorks 10 MG 11 E2 02 VLT is a registered Danfoss trademark 4...
Page 57: ...9 Troubleshooting VLT FC 100 LonWorks 56 MG 11 E2 02 VLT is a registered Danfoss trademark 9...
