Danfoss FC 100, Operating Instructions Manual, Page: 22 / 68

Output variables
Variable function Variable name SNVT type Profile FC 100 par.
Status word nvoStatusword SNVT_state FC VSD 16-03
Drive output [%] nvoOutputPcnt SNVT_lev_percent FC VSD 16-05
Drive output [Hz] nvoOutputHz SNVT_freq_hz FC VSD 16-13
kWh counter nvoDrvEnrg SNVT_elec_kwh_l FC VSD 15-02
DC Link Voltage nvoDCVoltage SNVT_volt FC VSD 16-30
Motor thermal nvoTempMtr SNVT_lev_cont FC VSD 16-18
Inverter Thermal nvoTempInvrtr SNVT_lev_cont FC VSD 16-35
Closed loop feedback nvoFeedback SNVT_count_inc_f FC VSD 16-52
Fanbelt broken nvoBrokenBelt SNVT_switch FC VSD 16-93
Alarm flag nvoAlarm SNVT_switch FC VSD 16-90
Warning flag nvoWarning SNVT_switch FC VSD 16-03
Alarm word nvoAlarmword SNVT_state_64 FC VSD 16-90 + 16-91
Warning word nvoWarningword SNVT_state_64 FC VSD 16-92 + 16-93
Extended statusword nvoExtendedStatusword SNVT_state_64 FC VSD 16-94 + 16-95
Digital inputs nvoDigitInput SNVT_state_64 FC VSD 16-60
Analog Input (53) nvoAnIn1 SNVT_volt/SNVT_amp_mil/SNVT_lev_percent FC VSD 16-62
Analog Input (54) nvoAnIn2 SNVT_volt/SNVT_amp_mil/SNVT_lev_percent FC VSD 16-64
Analog Input (X30/11) nvo101AnIn1 SNVT_volt/SNVT_lev_percent FC VSD 16-75
Analog Input (X30/12) nvo101AnIn2 SNVT_volt/SNVT_lev_percent FC VSD 16-76
Analog Input (X42/1) nvo109AnIn1 SNVT_volt/SNVT_temp_p/SNVT_lev_percent FC VSD 18-30
Analog Input (X42/3) nvo109AnIn2 SNVT_volt/SNVT_temp_p/SNVT_lev_percent FC VSD 18-31
Analog Input (X42/5) nvo109AnIn3 SNVT_volt/SNVT_temp_p/SNVT_lev_percent FC VSD 18-32
ECB option status nvoECBstatus SNVT_state FC VSD 31-10
Parameter access cmd. nvoParamResponse UNVT_param_response FC VSD -
VLT® FC 100 LonWorks 5 Configuration of the system
MG.11.E2.02 - VLT ® is a registered Danfoss trademark
21
5