Danfoss ET6200, Operator'S Manual

Page: 24 / 42

ATTENTION!
Risk of damage to machinery
If the catch bolt is not engaged, this may result in damage to the
machine and/or work piece when the machine is operated.
• Before inserting/extracting, make sure that the catch bolt is
engaged properly.
4. Release the catch bolt (3) and allow it to engage.
5.2.3 Inserting nipples
1. Move the hand lever (3) to the BACK position.
2. Open the protective cover (1).
3. Select the suitable holding ring (2) and insert it into the seat (6).
4. Place the nipple on the hose so that it is hand-tight and straight.
5. Place the work piece in the seat (6).
6. Use the hand wheel (4) to adjust the clamping dies in order to
centre the hose.