Danfoss ET6200, Operator'S Manual

Page: 12 / 42

•
When closing the protective cover, make sure that your extremi-
ties are not between the hose feed and the knife protection.
Risk of squeezing
There is risk of getting squeezed between the protection cover and
the chassis when closing the protection cover.
•
Close the protective cover by the handle.
•
When closing the protective cover, make sure that your extremi-
ties are not between the hose feed and the knife protection.
There is risk of getting squeezed between the work piece and the
clamping dies when closing the clamping device.
•
Keep sufficient distance to the clamping device.
Tilting hazard
The risk of tilting mainly exists while the machine is being trans-
ported.
•
Observe the machine's centre of gravity during transport.
2.3.2 Risk imposed by pneumatic system
Risks are imposed by all pneumatic lines and connections. Pneu-
matic systems are subject to special safety provisions.
•
After the machine is deactivated, the given and potentially haz-
ardous residual energy has to be considered.
•
Use correct hoses and hose clamps.
•
Only work in the permissible pressure range.