Danfoss ET6200, Operator'S Manual

Page: 26 / 42

5.2.4 Extracting nipples
1. Move the hand lever (3) to the PUSH position.
2. Open protective cover (1).
3. Select the suitable holding ring (2) and insert it into the seat (6).
4. Place the work piece in the seat (6).
5. Use the hand wheel (4) to adjust the clamping die (5) in order to
centre the hose.
CAUTION!
Risk of squeezing
There is a risk of injury from the clamping device when closing
the protective cover.
•
Make sure that no extremities are in the working area behind
the protective cover.
6. Close protective cover (1).
7. Move the hand lever (3) to the BACK position.
8. Open protective cover (1).
9. Remove the workpiece.