Danfoss ET6200, Operator'S Manual

Page: 16 / 42

(4) Clamping dies
(5) Holding rings
(6) Seat
(7) Catch bolt
(8) Clamping cylinder
(9) Protection cover
The machine is ready for operation as soon as it is connected to the
compressed air system.
In order to insert nipples into hoses or extract nipples from hoses, the
work piece is mounted in the seat (6) using a holding ring (5). In addi-
tion, the work piece is centred by the clamping dies (4). The clamping
dies (4) are adjusted using the hand wheel (3). The position of the in-
serter cylinder (1) can be adapted to the work piece. Once the posi-
tion of the inserter cylinder (1) has been set, the position is secured
by means of the catch bolt (7).
The protective cover (9) is closed manually before beginning with the
insertion or extraction process. When the protective cover (9) is
closed, the clamping cylinder (8) extends automatically and clamps
the work piece. The insertion/extraction is controlled by means of the
hand level (2). For this purpose, the hand lever (2) has the positions
BACK, STOP and PUSH. The protective cover (9) is opened manu-
ally after the insertion or extraction process. When the protective
cover (9) is opened, the clamping cylinder (8) retracts automatically
and releases the work piece so that it can be removed.
Accessories
The machine can be fitted with accessories. A list of the available ac-
cessories is included in the Annex, Section "Accessories".