WARNING!
Danger from tilting machine!
The machine may tilt if it is transported improperly. There is a risk
of being injured.
• Consider the machine's centre of gravity (1).
• Only lift the machine at the designated points.
1.
Lift the machine at the identified points (2) using the crane and
transport it to the installation site.
4.2 Intermediate storage of machine/unit
If the machine/unit cannot be mounted immediately upon delivery, it
must be protected against:
•
Contamination,
•
Weather influences,
•
Mechanical damage.
The machine/unit components may only be stored in closed rooms
and under the following conditions:
•
temperature between 10°C and 35°C,
•
maximum air humidity 80% (non-condensating).
4.3 Commissioning
The machine is commissioned by the customer's fitter.
1.
Place the machine on a stable and level workbench.
2.
Bolt the machine legs onto the workbench.
The workbench must be sufficiently solid and stable.
Summary of Contents for ET6100
