Outside skiving tool USM 10.2 EcoLine / USM 10.2
The outside skiving tool consists of the main body (1), the cutting arm
(6) and the centering pin (2).
The skiving length is set by adjusting the centering pin (2). The cen-
tering pin (2) is inserted into the drive shaft and secured using the
star-shaped grip (3). The outside skiving knife (4) is held by the cut-
ting arm (6) and secured using the clamp (5). The skiving diameter is
set by turning the star-shaped grip (7). The diameter can be read on
the adjusting scale (8).
The skiving diameter only has to be set for the initial setup or after
re-skiving.
Summary of Contents for ET6100
