the inside or outside. The hose is skived from the hose ends. The
skiving dimension is set mechanically in advance. The skiving chips
are collected in the chip box (6).
The skiving direction can be selected using the change in direction of
rotation switch (10) on the control panel.
➢
Turn to the right for inside skiving
➢
Turn to the left for outside skiving
Inside skiving tool USM 10.2 EcoLine / USM 10.2
The inside skiving tool consists of the pin (2), the inside skiving knife
(1) and the adjusting ring (5).
The skiving depth is set by turning the adjusting ring (5). The adjust-
ing ring is secured to the pin by the hexagon socket threaded pin (4).
The skiving diameter is set by adjusting the inside skiving knife (1).
The inside skiving knife is held by the hexagon socket threaded pin
(3). The inside skiving tool is inserted into the drive shaft (5) and se-
cured using the star-shaped grip.
Summary of Contents for ET6100
