Danfoss ET6100, Operator'S Manual

Page: 37 / 56

6.3 Replacing the skiving knives
6.3.1 Skiving knife USM 10.2 EcoLine / USM 10.2
ATTENTION!
Risk of damage to machinery!
Worn skiving knives may cause damage to the machine and skiv-
ing inaccuracies.
• Check the skiving knives daily.
1. Deactivate the machine on the power switch and secure it
against unintentional restart.
2. Open the protection cover.
3. Loosen the hexagon socket threaded pin (2) on the inside skiv-
ing tool.
4. Remove the inside skiving knife (1).
5. Insert a new inside skiving knife (1).
6.
For skiving knife adjustment, please refer to “Adjusting the skiv-
ing knives” in Section 5.
7. Tighten the threaded pin using the Allen wrench (2).