VI.KT.G6.02
12 | © Danfoss | 2016.05
Maintenance
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
-40
-30
-20
-10
0
10
20
30
[
o
C]
[
o
C]
1.0
1.4
0.6
0.2
1.8
2.2
3.0
3.5
2.6
4.0
0.1
0.3
0.4
How to determine another heat curve, if necessary:
Choose the calculated flow temperature for your system and the determined min.
outdoor temperature for your area. Pick the heat curve closest to the crossing point of
these two values.
The setting of the desired room temperature has an influence on the calculated flow
temperature (heat curve), no matter if a room temperature sensor is connected or not.
Floor heating systems
This controller is factory set for radiator systems, which typically are high flow temperature
systems. To control floor heating systems, which typically are low flow temperature systems,
you need to change the ‘Slope’ according to your type of system (typical setting: 0.6).
