background image

24 | Danfoss © | 2020.07

AN324050550815en-000201

Installation Guide 

 

Danfoss ECdry Touch Kit

The 5 Year Danfoss Warranty:

You have purchased a Danfoss heating system 

which we are sure will serve to improve the 

comfort and economy of your application.

Danfoss provides superior electrical heating 

solutions for total climate control in and around 

homes and buildings. Danfoss offers a complete 

product program with ECflex heating cables 

or ECmat heating mats, ECtemp thermostats, 

ECdry and ECdry heating systems, ECfast fixing 

strips and Danfoss Self-limiting heating cables 

combined with additional products completing 

the product program.

This 5 year warranty applies to ECdry heat-

ing mats and Danfoss Self-limiting heating 

cables, connection units and Danfoss crimp 

set for self-limiting heating cables.

Should you, against all expectations, experi-

ence a problem with your Danfoss product, 

you will find that Danfoss offers a 5 year 

warranty from the date of purchase on the 

following conditions:

During the warranty period Danfoss shall 

offer a new comparable product or repair 

the product in case the product is found 

to be faulty by reason of defective design, 

materials or workmanship. Repair or replace-

ment shall be carried out solely at Danfoss’s 

discretion. Danfoss shall not be liable for any 

consequential or incidental damages includ-

ing, but not limited to, damages to property 

or extra utility expenses.

The warranty shall be valid only if the 

WARRANTY CERTIFICATE is completed cor-

rectly and in accordance with the instruc-

tions, and provided the fault is submitted to 

the installer or the seller without undue de-

lay and proof of purchase is provided. Please 

note that the WARRANTY CERTIFICATE must 

be completed in English or local language.

An extension of the warranty period fol-

lowing repairs undertaken under warranty 

cannot be granted.

The Danfoss Warranty shall not cover any 

damage caused by incorrect conditions of 

use, incorrect installation or if installation 

has been carried out by non-authorised 

electricians. All work will be invoiced in full 

if Danfoss is required to inspect or repair 

faults that have arisen as a result of any of 

the above. 

The Danfoss Warranty shall not extend to 

equipment which has not been paid in full.

Danfoss will, at all times, provide a rapid 

and effective response to all complaints and 

inquiries from our customers. 

The warranty explicitly excludes all claims 

exceeding the above conditions.

Summary of Contents for ECdry 100





























Reviews: