Transportation
Do not apply any excess weight on the electric device during transportation.
See the weight of the electric device from the product data sheets at
.
The electric device is shipped in first class condition. Products are inspected and packed correctly to
prevent damage from ordinary handling during the transportation. Transportation conditions shall be in
accordance with the product specification, any kind of shocks must be avoided.
Plug and seal the cabling and cooling connections for transportation.
Receiving and unpacking
Inspect the electric device and the package immediately upon arrival. Ensure that the rating plate data in
the cover letter complies with the purchase order. All external damage in the package or in the electric
device must be photographed and reported to Danfoss immediately.
Lifting
Use correct, adequately dimensioned lifting devices and inspect them before lifting.
Do not apply any excess weight on the electric device when lifting it.
Use correct lifting slings. Use correct position and angle of lifting. The maximum permissible
range of lifting angles is shown in lifting figures.
Make sure that lifting slings are correctly routed so that they do not cause momentum on any
of the signal connectors.
See the rating plate and data sheets for weight information.
Lift the electric device using the correct lifting lugs/eyes only. See the lifting Figures in this
Chapter.
User Guide
EC-LTS1200-410
Transportation and storage
©
Danfoss | July 2021
BC355449988603en-000201 | 17
