Typical cable gland configurations for CG1
Connections
Typical cable gland applications
Connection to DC/DC-
converter (L1, L2, L3)
3x M25 cable glands
3x M25 cable glands
3x M25 cable glands
Low voltage side positive
connection (+LV)
1x M32 cable gland, 2x
M32 plugs
2x M32 cable glands, 1x
M32 plugs
3x M32 cable glands, no
plugs
Intended use of the electric device
The electric device is intended only for professional use. Installation, operation and
maintenance of the electric device is permitted only for trained personnel and professionals.
The electric device is intended for fixed installation, as a part of complete power generation
equipment or system.
Typical applications for the electric device are:
•
System component designed to be combined with EC-C1200-450 DCDC-converter, used to transfer
energy between two different voltage levels.
Application example
EC-C1200 DC/DC converter combined with the EC-LTS unit. LV+ and LV- can be connected, for example,
to battery and DC+ and DC- to DC-link. EC-C1200 would then control the battery discharging and
charging.
Not allowed use of the electric device
It is forbidden to use, handle, maintain and storage the electric device in following ways (including but
not limited to):
•
Using the electric device for other purposes than defined in the user guide.
•
Disregarding the obligation to comply with the user guide, safety signs and rating plate of the
electrical device.
•
Using the electric device, making adjustments and maintenance without first reading the user guide.
•
Exceeding the designed limits during the operation.
•
Using non-original service parts of wrong material causing corrosion problems and mechanical
failures in time.
•
Operating and performing maintenance on the electric device without appropriate personal
protective equipment.
•
Using the electric device for supporting other structures or indirect movements.
User Guide
EC-LTS1200-410
Product overview
©
Danfoss | July 2021
BC355449988603en-000201 | 13
