12.4
Malfunctions and Resolutions
Table 5.
Malfunctions and Resolutions
Malfunction
Cause
Resolution
The outlet water is cold. The display is
dark.
•
Bad connection of power supply;
•
Outlet water is set to a low temperature;
•
Outlet water temperature controller is
damaged;
•
Indicator or circuit board is damaged.
•
Contact a technician.
•
Set the outlet water to a higher
temperature.
•
Contact a technician.
•
Contact a technician.
No hot water from the outlet.
•
Tap water has been cut away;
•
Water pressure is too low;
•
Inlet valve has been closed.
•
It will return to normal after
water has been supplied.
•
Use it when the pressure is
higher.
•
Open the inlet water valve.
Water leakage
The joints on the pipeline are not well sealed. Check and reseal all joints.
12.5
After-Sale Service
If the unit runs into some sort of malfunction or error (except a Non-error malfunction), it should be shut down and
the power supply switched off. Contact your local service center or supplier for help.
Installation, Service and User Manual VMGFK202 – 35
Summary of Contents for DTW 300 SP
Page 1: ...Installation Service and User Manual DTW 300 SP VMGFK202...
Page 4: ......
Page 41: ...VMGFK202...
