DEVIreg™ 530M
7
Installation Guide
By connecting an external timer to the terminal marked by
a moon symbol (and by using for example the same phase
as for the mains power supply), the thermostat can be set
to reduce the temperature by 5ºC during specified periods.
The screen of the heating cable must be connected to
the earth conductor of the power supply cable by using a
separate connector.
Note:
Always install the floor sensor in a conduit in the floor.
3. Mount and reassemble the thermostat.
• Fasten the thermostat to a socket or an exterior wall
box by driving the screws through the holes in each
side of the thermostat.
• Install the frame and front cover in the reverse order of
disassembly.
4. Turn on the power supply.
