DEVIreg™ 132
Installation Guide
5
Dimensions
82 x 82 x 36 mm
Weight
90 g
The product complies with the EN/IEC Standard “Automatic
electrical controls for household and similar use”:
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT:
When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
•
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
•
The thermostat must be connected to a power supply
via an all-pole disconnection switch.
•
The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
