background image

DEVIreg™ 132

Installation Guide

12

Warranty

A 2-year product warranty is valid for:

• 

thermostats: DEVIreg™ 132.

Should you, against all expectations, experience a problem with your DEVI product, 

you will find that Danfoss offers DEVIwarranty valid from the 

date of purchase

 

on the following conditions: During the warranty period Danfoss shall offer a new 

comparable product or repair the product if the product is found to be faulty by 

reason of defective design, materials or workmanship. The repair or replacement.
The decision to either repair or replace will be solely at the discretion of Danfoss. 

Danfoss shall not be liable for any consequential or incidental damages including, 

but not limited to, damages to property or extra utility expenses. No extension of the 

warranty period following repairs undertaken is granted.
The warranty shall be valid only if the WARRANTY CERTIFICATE is completed 

correctly and in accordance with the instructions, the fault is submitted to the 

installer or the seller without undue delay and proof of purchase is provided. Please 

note that the  WARRANTY CERTIFICATE must be filled in, stamped and signed by the 

authorized installer performing the installation (Installation date must be indicated). 

After the installation is performed, store and keep the WARRANTY CERTIFICATE and 

purchase documents (invoice, receipt or similar) during the whole warranty period.
DEVIwarranty shall not cover any damage caused by incorrect conditions of use, 

incorrect installation or if installation has been carried out by non-authorized 

electricians. All work will be invoiced in full if Danfoss is required to inspect or 

repair faults that have arisen as a result of any of the above. The DEVIwarranty shall 

not extend to products which have not been paid in full. Danfoss will, at all times, 

provide a rapid and effective response to all complaints and inquiries from our 

customers.
The warranty explicitly excludes all claims exceeding the above conditions.
For full warranty text visit 

www.devi.com.

devi.danfoss.com/en/warranty/

Summary of Contents for DEVIreg 132

















Reviews: