DANFOSS HEATING
7
UK
2.0 Main functions
unit controls the air flow. At times when the moisture
content of the outdoor air is low, typically in the heating
season,
choosing demand mode will help prevent that
the air in your house becoming too dry in the winter
.
In demand mode the airflow is automatically reduced,
whenever the relavtive humidity in the room becomes
too low. In demand mode, the system automatically
detects if you shower, which triggers a short term
automatic boost.
Note:
Outside the heating season, when the outdoor
air contains more moisture than in the winter period,
the air flow will remain more or less constant, at a rate
equivalent to the stored basic step - this ensures maxi-
mum comfort in the part of the season where heat loss
is neglible.
Mode > Program mode
In
program
mode a pre-defined family profile is chosen.
Based on the profile, the system then concentrates air
flow to periods when occupants of the house are actu-
ally present, or where it makes the most sense, from
a ventilation point of view. If none of the five pre-
defined family profiles suits your requirements, you can
download (as freeware) a PC tool that, allows you to
make your own user profile (see installation manual for
more info, or go to www.air.danfoss.com).
The default profile is no. 1, so this profile is active if you
choose ”program mode”.
PROG
Øverste rækker
Nederste rækker
%
”Program icon”
