DANFOSS AIR
12
3.0 Maintenance
3.1 Maintenance,
changeing the
air filters
Your Danfoss Air unit was designed to ensure an abso-
lute minimum of maintenance. In day-to-day operation,
you will only need to change the air filters 1-2 times a
year, depending on your air flow rate, and the pollutant
level where you live. In industrial areas, and in areas
with a high pollen content in the outdoor air, the filters
will clogg faster than in a typical surburban environment.
When the unit gives the filter alarm (audible alarm from
the Air Dial + message in display)
If you have bought the
optional pollen filter, it
should be fitted in the
filter slot to the right
(on all models) - as this
is the filter that filters
the outdoor air
- Go to the air unit
- Remove the front cover plate - no tools are needed,
just pull the handle and lift cover of unit
- Pull out the filters and
inspect visually (if the
filter is only lightly fouled
/ discolored, you can at-
tempt to clean it, using a
vacuum cleaner equipped
with a brush - but generally
this is
not worthwhile nor
advisable
)
- Change filter as required,
use the arrows to align
- Push the filter reset button,
located next to the filter
