DANFOSS HEATING
15
UK
3.0 Maintenance
Clean interior surfaces of the unit with a wet sponge or
cloth (use a mild soapy solution).
UNDER NO CIRCUMSTANCES use solvents to clean the
foam parts as solvents can dissolve the special foam
material.
Avoid spraying water onto the main circuit board. If you
do happen to spill water onto the circuit board, tap the
circuit board lightly using a dry cloth. Leave to air dry
for min. 24 hours before reconnecting the power.
Reassemble unit in reverse order, put foam front panel
back in place, fix it with the three metal braces and
tighten the torx screws. Replace front cover panel, and
you are ready for years of trouble free service again!
