39
NOTE:
A condensor temperature sensor is
required to use these parameters.
Condenser protection is generally used in dusty
environments where the condenser may accumu-
late a layer of dust or dirt and therefore be at risk of
overheating .
7.9 Condenser Protection /
Con
ERC menu
code
Default
Min
Max
Unit
Conv
Unit
Scale
Default Access
Shop Ser OEM
Condenser Protection
Con
Condenser Alarm Limit
CAL
80/176
0/32
85/185
C/F a
°C/°F
1
-- -- RW
Condenser Block Limit
CbL
85/185
0/32
85/185
C/F a
°C/°F
1
-- -- RW
Condenser OK limit
CoL
60/140
0/32
85/185
C/F a
°C/°F
1
-- -- RW
Condenser Low Limit
CLL
5
-20/-4
20/68
C/F a
°C/°F
1
-- -- RW
Condenser Alarm Limit / CAL
This parameter sets the temperature for the condenser at which an alarm will
be generated .
Condenser Block Limit / CbL
This parameter sets the temperature which if reached will cause the compressor
to switch off .
Condenser OK Limit / CoL
This parameter sets the temperature at which the compressor is allowed to
start again after the temperature set in CbL above has been exceeded and the
compressor stopped .
Condenser Low Limit / CLL
This parameter sets the lowest (condenser) temperature at which the
compressor is allowed to start .
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
ERC
102 Reference manual – 7 PARAMETERS
