13
1 . Use a flat head screwdriver (ideally the
one supplied with the ERC 102 sample package)
and insert it carefully between the front frame
and the controller .
3 . Cabinet . Do not use a different type of
screwdriver or a sharp item such as a knife
which risks causing damage .
4.2.1 Unmounting
4.3 Fully integrated design – Option 3
An option is available for OEMs wanting to use the ERC
102 in a fully-integrated design . Please contact your
local Danfoss representative for more information .
2 . Gently
twist
the screwdriver to remove the
front frame . Do this in four places next to each
clip area .
ERC 102 Reference manual – 4 MOUNTING
