7
© Danfoss 03/2011
VIUHM602
Danfoss Heating Solutions
Instruction
CF-RC Remote Controller
5.1.2 Options
Menu
Rooms
Options:
From the
Rooms
menu, select
Options
to get access to the
following room options:
• Set temperature:
Set and lock set temperature for the room thermostat. Locking pre-
vents adjustment of set temperature on the room thermostat.
• Set Min/Max:
Set and lock minimum and maximum temperatures for the room thermo-
stat. Locking prevents adjustment beyond these limits on the room thermostat.
• Change room name:
Change room names by means of a list of possible room names or
you can use the
Spell.....
menu to key in other names.
• Set floor Min/Max:
Set and lock minimum and maximum floor surface temperatures
(option only available with the CF-RF Room Thermostat with infrared floor sensor).
• Setback:
Override the next or ongoing setback period
(option only available if setback
program is activated, see chapter 5.2.2).
• Cooling:
Disable cooling function for the room
(option only available when Master Con-
troller is in cooling mode).
• Heating/cooling
Set mode:
Select heating/ cooling mode to
Auto
,
Heating
or
Cool-
ing
(option only available when 3- or 4-pipe heating/cooling is enabled)
.
• Heating/cooling
Setting locked:
Select heating/cooling mode to be
Locked
or
Un-
locked
(option only available when 3- or 4-pipe heating/cooling is enabled)
.
5.2 Program
Menu
Program:
From the start-up screen, activate the
Program
menu to view time
programming options.
5.2.1 Period program
Menu
Program
Period program
Create program:
From the
Program
menu, select
Period program
Create program
to set room temperature for all room thermostats dur-
ing e.g. a holiday. Use the up/down and left/right selectors (fig. 1-
/
) to set start date,
end date and temperature for the program.Confirm each setting with OK. The created
program is diplayed. Press
Yes
to activate the program.
Create program
Start date : 23. Dec
End date : 1. Jan
Temperature : 15.0°C
Activate?
Yes
No