Danfoss Heating Solutions
VIUHM602
© Danfoss 03/2011
4
1. Functional Overview
1.1 Front (fig. 1)
Display.
Soft key 1.
Soft key 2.
Up/down selector.
Left/right selector.
Icon for system alarm.
Icon for communication with Master Controller.
Icon for switch to 230 V power supply.
Icon for low battery level.
1.2 Back (fig. 2)
Back plate/docking station.
Battery compartment.
Screw hole for wall mounting.
Screw and wall plug.
Transformer/power supply plug.
Note: CF-RC Remote Controller has a self-explanatory menu structure. All settings are easily
carried out with the up/down and left/right selectors in combination with the soft keys.
When the display back light is out, the first touch of a button only activates this light.
2. Installation
2.1 Preparations
• Install Remote Controller after you have installed all room thermostats.
• Remove the protection strip to connect the enclosed batteries.
• Carry out the assignment of Remote Controller to Master Controller within a distance
of 1.5 m.
• When the display back light is out, the first touch of a button only activates this light.
2.2 Activate Install mode on Master Controller (fig. 3)
• Use the menu selection button
to select
Install
mode. The install LED
flashes.
• Activate
Install
mode by pressing OK
. The install LED
goes ON.
Instruction
CF-RC Remote Controller
