2
5
6.Disassembly
The disassembly of the marquee is simply done in the reverse sequence
of the installation, however the following points should be noted.
Note:
Covers and walls should be dry before assembly to extend the service
life and to guarantee cleanliness. Therefore, even the disassembled
parts should be sorted and loaded immediately after the disassembly.
6.1
Disassemble foot tubes (if available).
6.2
Place side and pediment awning on a clean surface and fold.
6.3
Remove pediment cover as described in 6.2.
6.4
Disassemble roof cover clamp at the eave rail.
6.5
Loosen roof rope at the eave.
6.6
Remove roof cover as described in 6.2.
6.7
Remove wall braces in a field.
6.8
Mount rails in this field and place it.
6.9
Shift the first truss of this field.
6.10
Break truss into its parts.
6.11
Disassemble all the remaining trusses similarly.
6.12
Pull anchor and remove foot plates.
