1
6
4.3
Assembling the pediment supports
Note:
Depending on the marquee width, multiple pediment supports may be
required and should be installed according to the drawings.
4.3.1
Place the pediment support vertically below the ridge shoe /bar of
the corresponding end bar and insert into the intake at the ridge shoes
and screw. (Image 5, page 11)
4.3.2
Insert pediment support into the base plate and adjust with
telescope if required (loose the screw for this) and ensure that the
pediment support is even in the base plate.
4.3.3
Fix base plate with ground anchors.
