4
1.1 General
Please read this manual thoroughly before starting assembly. Perform
the assembly stop only if all the points are clear, the components are
identified and follow the sequence.
Please follow accident prevention regulations.
Improper handling, non-adherence of rules may result in mortal injury.
Follow the sequence of this assembly manual.
At least
4 persons
are required for installing the marquee.
Safety instructions:
- Ensure that all the eaves are correctly mounted.
- Rope braces must be tightened loosely after assembly.
- Defective or damaged components must be replaced immediately with
original spare parts.
- Removal of diagonal braces is forbidden.
- Secure all the bolts after assembly so that they do not slide out.
- Wear protective clothing (e.g. gloves) to prevent
injuries.
- Use the supplied tools for assembly.
Please note:
The model approval (test log) contains requirements, specifications,
conditions and operating instructions for "mobile constructions". It should
be kept at the installation location for review by relevant authorities if
required. Each new installation should be communicated to the relevant
authorities.
In addition, the "Guidelines for the construction and operation of mobile
constructions", accident prevention regulations as well as relevant safety
regulations and standards shall be applicable (trade association). These
regulations must be strictly followed.
Assembly helpers should be instructed about possible hazard before they
start the assembly. At least one expert (supervisor) should take
responsibility for supervision during installation and removal. Expert here
means that the person has knowledge of the work processes and the
required safety measures.