Using the top cabinet template
There are instructions on the top
cabinet template that detail how it
should be used.
Tape the top cabinet template to the
under side of the cabinet where the
microwave will be installed.
Drill holes for the top support
screws and a hole large enough for
the power cord to fi t through.
INSTALLATION INSTRUCTIONS
Adapting blower for recirculating
exhaust
1. Remove the screws that secure
the blower motor. Lift up the
blower plate.
2. Pull out the blower unit. Be
careful not to stretch the wires
and make sure the wires do not
get pinched. Rotate the blower
so that it faces toward the front
and replace it in the appliance.
3. Secure the blower motor with
screws. Secure the blower plate
with screws.
1
2
3
20
