72('*(
30” min
1
2
72('*(
3
11 1/3”
16 2.5”
11 1/3”
15 1/2”
(394.5mm)
(417mm)
(287.5mm)
(287.5mm)
4
INSTALLATION INSTRUCTIONS
• Tape the mounting template
to the wall and then mark the
three screw holes at the bottom
of the template. Remove the
template and double check the
marked holes with the actual
mounting plate to ensure that
they match.
4. Template damaged or
unusable
If the template arrives damaged or
cannot be used, measure and mark
the wall with these dimensions.
The bottom edge of the mounting
plate must be 16 2/5” from the
bottom edge of the upper cabinet.
The mounting plate holes must be
15 1/2” from the bottom edge
of the upper cabinet and must be
in line with each other. Each hole
must be 11 1/3” from the center
line.
Do not install the actual mounting
plate yet, the exhaust duct work
must be installed fi rst.
10
