Mounting the microwave oven
For easier installation and personal
safety, two people should be used
to install the microwave.
Do not grip or use the handle
during installation.
If the surrounding cabinets are
metal, use the nylon grommet
around the power cord hole to
prevent damage to the cord.
When mounting the microwave,
thread the power cord through the
hole in the cabinet. Keep the cord
tight when mounting the microwave
to ensure the cord does not get
pinched. Do not lift the microwave
by the cord.
1. Lift the microwave, tilt it
forward and hook the slots on
the back of the microwave onto
the lower tabs of the mounting
plate. Rotate the front of the
microwave against the bottom
of the cabinet.
2. Insert two self aligning machine
screws with washers through
the top cabinet holes and
tighten two turns.
3. If the cabinet has an overhang,
insert the wood fi ller blocks
before completely tightening the
screws.
Cabinet front
Cabinet bottom
Washer
Wood filler block
Microwave top
1
2
3
INSTALLATION INSTRUCTIONS
18
Install grease fi lters
Slide the grease fi lters into the
openings in the bottom of the
microwave until they click into place.
The appliance should not be operated
without the grease fi lters installed.
Connecting ductwork
Adjust the exhaust adapter so it can
connect to the house duct.
Extend the house duct to connect to the
exhaust adapter.
Use duct tape to seal the exhaust duct
joints.
