RECIRCULATING (NON-
VENTED)
Use these instructions if the
appliance will not be vented to the
outside.
Install the mounting plate
Use a 5/8” drill to make two holes
that will enter the drywall. Use a
3/16” drill to make a hole that will
enter a wall stud. Use the mounting
template to decide the location of
the holes. At least one hole must
enter a wall stud.
Insert the machine screws into the
mounting plate through the holes
designed to go into drywall and
attach the wing nuts 3/4” onto
each machine screw.
Place the mounting plate against
the wall and insert the wing nuts
into the holes in the wall. The wing
nuts will open on the other side of
the wall to secure the screw.
Do not place a wing nut on the
screw that will go into the wall stud.
Insert a wood screw through the
mounting plate and into the wall
stud. Tighten all screws.
ϱШϴΗ
INSTALLATION INSTRUCTIONS
19
