Danatronics, Corp.
8
Re-charging the Battery
To re-charge the battery, simply plug in the charger to an AC outlet (between 100-240V)
and plug the other end into the USB connector on the top of MTG-99 gage. The
F4
key
will light up with a blue LED when charging, and the light will go out when fully
charged. Allow several hours (up to 10 hours) to fully charge.
Note:
There is a battery indication monitor on the bottom right of the screen showing the
percent of battery life, as seen below at 75%.
You may also use a computer instead of the wall charger to charge the gage, but this will
take significantly more time than using an AC outlet. If you decide to charge the gage
