MTG-99 Hall Effect Gages
45
3.
If Absolute or Percent are chosen a new field,
DIFF REF VALUE
, will appear.
Use the
up and down arrows
to enter the desired value
4.
When finished, press the
F1 – Back
key to exit the screen.
Display Rate
The display rate determins how often the measurement thickness values displayed on the
screen are refreshed. Min/Max and Max-Min both always operate at 60hz, but will
update the displayed value based on the set display rate.
To adjust the
Display Rate
, follow these steps:
1.
Use the up and down arrow keys to select the
Display Rate
option and press the
MENU/OK
key or the
right arrow
to enter the
Display Rate Menu
.
2.
Use the up and down arrow keys, to adjust the display rate up or down.
3.
When finished, press the
F1 – Back
key to exit the screen.
Min/Max
The Min/Max option provides multiple options for displaying the maximum and
minimum values on the measurement screen.
To set the
Max/Min
options, follow these steps:
1.
Use the up and down arrow keys to select the
Max/Min
option and press the
MENU/OK
key or the
right arrow
to enter the
Min/Max menu
.
2.
Use the up and down arrow keys, followed by the
MENU/OK
key, to select any
of the following options:
Off
: Disables the Min/Max feature
Min&Max
: Displays both the Minimum and Maximum values measured
on the measurement screen
Max-Min: Displays the sum of the maximum value measured minus the
minimum value measured
Note:
To clear and reset Mix/Min values while making readings, press
F3
