Power and Connectors
Danaher Motion Kollmorgen
12 05/07
M-LN-016-0702
Rev
D
3.2.2.
POWER SUPPLY TO LOGIC POWER
OUTPUT (C7)
Connector type: 4-pin
Logic Power Output Connector (C7)
Pin
Number
Functionality
1
+15 VDC Unregulated Supply Output
2
-15 VDC Unregulated Supply Output
3 DC
Common
4
+8 VDC Unregulated Supply Output
3.2.3.
POWER SUPPLY TO LOGIC INPUT
VOLTAGE (C8)
PA28xx only!
Connector type: 3-pin
Logic Input Voltage Connector (C8)
Pin
Number
Functionality
1
AC Logic Power In
2 Not
Used
3
AC Logic Power In
3. 3
SERVOSTAR
C
ONNECTOR
P
INOUTS
3.3.1.
SERVO
STAR
TO SERIAL
COMMUNICATION (C1)
This connector provides fault contact output that indicates the status of the
DC Bus output (BUS+ and BUS-). The contacts close when the DC Bus
outputs are ready and available for use. Under faulted conditions or when
the DC Bus outputs are not available, these contacts open. Attempting to
enable the SERVO
STAR
before the DC Bus Status output is active may
cause erratic operation.
Connector type: 2-pin
Serial Communication Connector (C1)
Pin
Number
Functionality Functionality
1 Shield
6 Reserved
2 RECV
(RXD)
7
Reserved
3 XMIT
(TXD)
8
Reserved
4 Reserved
9
Reserved
5 Common
