CE MARK CONFORMANCE
Servo drives are components that are intended to be incorporated into
electrical plant and machines for industrial use. When the servo drives are
built into machines or plants, drives cannot be operated until the machine or
plant fulfills the requirements of the EC Directive on Machines 89/392/EEC
and the EC Directive on EMC (89/336/EEC). EN 60204 and EN 292 must
also be observed.
In connection with the Low Voltage Directive 73/23/EEC, the harmonized
standards of the EN 50178 series are applied to the amplifiers, together with
EN 60439-1, EN 60146 and EN 60204.
The manufacturer of the machine or plant is responsible for ensuring that
they meet the limits required by the EMC regulations. Advice on the correct
installation for EMC - such as shielding, grounding, arrangement of filters,
treatment of connectors and the laying out of cabling - can be found within
this documentation.
Conformance with the EC Directive on EMC 89/336/EEC and the Low
Voltage Directive 73/23/EEC is mandatory for the supply of servo drives
within the European Community.
An authorized testing laboratory in a defined configuration with the system
components has tested the servo drives. Any divergence from the
configuration and installation described in this documentation means that
you are responsible for the performance of new measurements to ensure
that the regulatory requirements are met.
Danaher Motion’s SERVO
STAR
S-Series
and C-Series drives and systems
have been successfully tested and evaluated to the limits and requirements
of the EC Directive on EMC (89/336/EEC) and the EC Directive on Low
Voltage (72/73/EEC). The product lines have been evaluated to EN50178
and EN60204 as a component of a machine and other relevant standards.
The EMC of a system can be identified by emissions and immunity.
Emissions refer to the generation of EMI (electromagnetic interference) and
immunity refers to the susceptibility levels of the equipment. Limits were
derived from generic standards EN55081-2 and EN55082-2 for heavy
industrial environments. The SERVO
STAR
S and SERVO
STAR
CD series
of drives and BUS Modules have been tested for radiated emissions,
conducted emissions, EFT, ESD, surge, conducted immunity, and radiated
immunity. These tests have been done in accordance with EN55011,
EN61000-4-2, ENV50140, IEC 1000-4-4, EN61000-4-5, and ENV50141.
CAUTION
Installation of the equipment is critical in designing
for system and machine electromagnetic
compatibility (EMC). You must apply the installation
recommendations and the CE filtering Practices when
mounting and installing the drive system for CE
conformance.