Dan Dugan Sound Design E-2 User Manual Download Page 53

Page: 53 / 68

Dugan Model E-2 User Guide

Dugan Control Panel Software

Use the Master

music system threshold

settings to fine tune the master threshold

for each group.

There are several ways to enter values (see page 38).

If all the channel

auto mix gain

displays stay at full gain, the threshold signal is

missing or too low.

10.

Fine tune individual channels using their

thresh

controls so the

auto mix gain

dis-

play stays close to -15 dB.

To close the Music System pane on an iPad, swipe it to the right.

Controlling Ambience

The Music System does not maintain constant ambience like the Speech System.

If you want to smooth out the ambience:

Click the arrow on the right edge of the Master Pane of the Dugan Control Panel
to display the Music System controls.

Reduce the maximum attenuation by setting the

auto mix depth

field to -10 dB.

This limits the range of downward expansion and mixes in a steady ambience.

If you use the Model CP-2 Control Panel, the

last hold

function is available

press

both the Master

OVERRIDE

and

PRESET

buttons at once. Their LEDs blink to indi-

cate that

last hold

is on; toggle it off the same way. The

last hold

function keeps

the last mic on that stays above -3 dB gain for 0.5 seconds. When another mic
passes the same criteria, it becomes the

last hold

mic.

NOTE:

The Music and Speech Systems operate independently, but the

auto mix depth

control is

global to both. Use different groups if necessary.

To close the Music System pane on an iPad, swipe it to the right.

iPad

Summary of Contents for E-2





































































Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands

Dan Dugan Sound Design E-2, User Manual

Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands