Dan Dugan Sound Design E-2 User Manual Download Page 50

Page: 50 / 68

Dugan Model E-2 User Guide

Group Master Controls

The Master Pane displays a set of group master control buttons for each group in use.

Override

Activating the Master

OVERRIDE

button has the following effect on individual channels:

•

Channel

override

button active: puts the channel in

man

mode with full gain (no

automixing);

•

Channel

override

button inactive: mutes the channel.

De-activating the Master

OVERRIDE

button returns the channels to normal operation.

Select channel(s) to include in the override group by activating their

override

button(s).

Remove channel(s) from the override group by deactivating their

override

button(s).

Preset

Clicking the Master

PRESET

button sets the channel modes (

man, auto, mute

) to those

shown on each channel’s

preset

buttons. Use these settings to store your favorite

channel mode settings. When the unit powers up, the channels default to their pre-
set modes.

Mute

Click the

MUTE

button to mute a group. Click it again to unmute the group.

Summary of Contents for E-2





































































Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands

Dan Dugan Sound Design E-2, User Manual

Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands