Dan Dugan Sound Design E-2 User Manual Download Page 43

Page: 43 / 68

Dugan Model E-2 User Guide

Dugan Control Panel Software

Figure 5-7

Channels in three groups

Override

Override can be used to instantly mute all mics except one (the host or chairperson).
However, any number of mics can be included in the override group. It can thus be
used to make a dramatic A/B comparison between automatic and conventional mixing.

To assign channels to an override group, activate the

override

button on each channel.

Pressing the Master section

OVERRIDE

button puts channels with their

override

buttons

lit into

man

mode. All other channels are muted. Press the

OVERRIDE

button again to

restore normal automixing operation.

Meters

The meters have three display modes.

Table 5-1

Meter modes

The default meter display is

auto mix gain

. This is the most useful choice during normal

operation; the input and output meters are only used when setting or checking levels.

Click on the Master

meters

button to toggle through the three meter display modes.

Meter Displays

Meter Color

auto mix gain

action of the Dugan Speech System

green

input

input level

yellow

output

output level

blue

Summary of Contents for E-2





































































Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands

Dan Dugan Sound Design E-2, User Manual

Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands