Dan Dugan Sound Design E-2 User Manual Download Page 52

Page: 52 / 68

Dugan Model E-2 User Guide

To set up the Music System:

Patch up to three reference mic signals (one for each group) for the Music System
threshold inputs as described on page 21.

Click the arrow on the right edge of the Master Pane to open the Music System
panel.

Figure 5-13

Dugan Music System controls

Start with the three Master

music system threshold

controls set to 0 dB.

Activate the

music system

buttons on the desired channels.

Start with all channel

thresh

controls at 0 dB.

Activate the

auto

buttons for all channels in use, and the

mute

buttons for unused

channels.

On all channels, activate the

preset

button adjacent to the selected mode.

This preserves your settings when the unit is powered off and on.

On the console, set a ballpark level using the preamp gain of the music system
threshold’s mic so all music system channels hover around -15 dB.

Click to display
the music system
controls

Click to close
this panel

Summary of Contents for E-2





































































Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands

Dan Dugan Sound Design E-2, User Manual

Search results

Summary of Contents for E-2

Reviews:

Related manuals for E-2

Brands by name

Popular brands