90
Piranha4 8k Color Camera User's Manual
03-032-20274-00
Teledyne DALSA
Appendix G: Error and
Warning Messages
Hardware status
under “Camera Information”
The hardware status are binary flags with each bit being independent from each other. The
message should be “Good” meaning everything is functioning correctly but if a hardware
failure does occur in the camera, one or more these flags could be set. Some of these flags
set will result in the status light turning red.
Definition
Flag
No trigger during more than 1s
Bit0
Trigger too fast
Bit1
SNS Pattern failed
Bit2
Overflow occurred during FFC calibration
Bit8
Underflow occurred during FFC calibration
Bit9
Calibration error
Bit10
CC3 scrolling direction (0: Fwd, 1: Rev)
Bit11
Initialization in progress
Bit15
Hardware error detected
Bit16
GenCP error code
The error codes returned by the camera are compliant with the GenCP standard.
